I can do this right???

This afternoon I started laying things out.  The tool cabinet poster went up on the wall where the real cabinet will ultimately reside.

I started laying out all the cherry and trying to match up pieces for gluing.  Most sides of the cabinet will require gluing 3 boards together and the shelves 2 boards. Four sides and FIVE shelves.

Then there’s the back which will use up the remaining tongue and groove fir I have left.  And then there’s five drawers to be made.

And finally I got out the panels for the door fronts.  These are book matched oak and 3/4′ thick that I’ll need to take an 1/8 to 1/4″ off of so they’ll be proper door panels.

By the time it was all over, I was starting to feel a bit overwhelmed.  So I ran upstairs to look at the newly completed bathroom wall cabinet .. I think I can, I think I can ….

This is the final design.  The bottom 3 slots will have drawers in them (not drawn).  Cubbies on the second and third shelf will go all the way across the cabinet (not drawn out) and are spaced for individual planes.

7 thoughts on “I can do this right???”

  1. Glenn, I added in the clip of the sketch up file. If I can figure out how to attach the actual sketch up file I will. Its below the fold and you can see it if you click "Read more". Steve, thanks so much! Signed, Chewing nails. ;~D

  2. Hi Marilyn,Thanks for stopping by. You're welcome Marilyn. Thanks for stopping by. You might already know, but there are a fair number of Mr. Hayward's books available through used book sites. I didn't know of any plan to enclose all of his works in a single casing. I think there might be more than one volume when it happens though!RegardsJohn 🙂

Leave a Reply to badger Cancel reply